how to weatherstrip a door

easyHome Repaircheck locally5 steps

Safety Warnings

Measuring tape — check locally

Scissors or Utility Knife — check locally

Weatherstripping material — check locally(check locally)

Identify and locate crevices and defects in the door where cold currents enter.

Tip: Check for gaps around the edges and the bottom of the door.

Measure the dimensions of the door frame and the gaps to be sealed.

Tip: Ensure accurate measurements to avoid wasting material.

Cut the weatherstripping material to fit the measured lengths of the door frame.

Tip: Use a utility knife or scissors for clean cuts.

Apply the weatherstripping to the door or door frame to stop the access of external air.

Tip: Ensure a tight fit to effectively block drafts.

Test the door to ensure it closes securely and the seal is airtight.

Tip: Check for any remaining chinks or irregular apertures.

Address cold draughts entering through crevices to prevent the feeling of being 'pierced with cold'.

Synthesized from 2 verified sources:

Gutenberg: Dwelling ConstructionView →

Gutenberg: Economical Farmhouse PlansView →